類比示波器選擇表

TS-81000

Ultra high Writing Speed of 10div/ns can capture 6div amplitude, 500ps rise time pulse
DC-1GHz (50 Ohm), DC-500MHz (1megaohm, Passive Probes are optional), 4CH
Sharp traces and High resolution color display 800 x 480dot
Versatile output Interface and Documentation functions
Built-in printer, LAN Interface, ATA card slot, Video output(NTSC/VGA)



TS-8500


Ultra-high brightness display (more than 20,000 times greater than our current models)
Maximum writing speed for all ranges and guaranteed wide bandwidth from DC to 500MHz
Widest DC to 500MHz is guaranteed at all ranges for all channels. The maximum visual writing speed is 200ps/div
Dual delay function
Two independent delay time settings are provided for B sweeps, allowing delay expansion of two signals.
"Burn-free" and "shock-free" thanks to CCD waveform storage
Persistence function allow superimposition of waveform
NTSC video output
Since a CCD is used for waveform storage, waveform images can be easily output to a video printer via the video output. Image data can also be transferred by connecting the scope to a personal computer via video board (optional).



SS-7840H

DC∼470MHz bandwidth (SS-7840H)
DC∼400MHz : SS-7840
DC∼250MHz : SS-7825
2mV/div (CH1, CH2) (SS-7840/7825)
5-digit Frequency counter
TV/HDTV triggering
Field (EVEN、ODD、BOTH) and line selection is possible for NTSC、PAL(SECAM)、HDTV.
TV clamp (Pedestal clamp) function (CH1, CH2)
The amplitude of video signals varies dynamically depending on the intensity of a picture. With this function, stable observation is ensured
Event trigger
High-speed auto setup function



SS-7840

DC∼470MHz bandwidth (SS-7840H)
DC∼400MHz : SS-7840
DC∼250MHz : SS-7825
2mV/div (CH1, CH2) (SS-7840/7825)
5-digit Frequency counter
TV/HDTV triggering
Field (EVEN、ODD、BOTH) and line selection is possible for NTSC、PAL(SECAM)、HDTV.
TV clamp (Pedestal clamp) function (CH1, CH2)
The amplitude of video signals varies dynamically depending on the intensity of a picture. With this function, stable observation is ensured
Event trigger
High-speed auto setup function



SS-7821

DC to 200MHz, 3CH, 8 traces
High-speed auto setup
Save/recall of up to 32 panel settings
Full TV triggering with field and line selection
Maximum sensitivity of 2mV/div, fastest sweep of 2 ns/div
5-digit frequency counter
CH3 sensitivities of 50mV,100mV,500mv/div
Cursor measurement values/panel settings readout function



SS-7811

DC to 200MHz, 3CH, 8 traces
High-speed auto setup
Save/recall of up to 32 panel settings
Full TV triggering with field and line selection
Maximum sensitivity of 2mV/div, fastest sweep of 2 ns/div
5-digit frequency counter
CH3 sensitivities of 50mV,100mV,500mv/div


Cursor measurement values/panel settings readout function



SS-7810

High-speed auto setup
Save/recall of up to 32 panel settings
Full TV triggering with field and line selection
Maximum sensitivity of 2mV/div, fastest sweep of 2 ns/div
5-digit frequency counter
CH3 sensitivities of 50mV,100mV,500mv/div
Cursor measurement values/panel settings readout function



SS-7804

DC to 40MHz, 2CH + ext. trigger input, 3 traces
Cursor measurement values
Panel settings readout function
(Probe with sensor is optionally available)
TV triggering with the first TV line selection capability in its class
Bright and sharp display with 16kV accelaration voltage CRT
5-digit frequency counter



SS-7802A
Deflection factor and attenuator compensation (maxuimum output voltage : 100V, square-wave : 1kHz)

DC to 20MHz, 2CH + ext. trigger input, 3 traces
Cursor measurement values
Panel settings readout function
Input connector with probe sensor
(Probe with sensor is optionally available)
TV triggering with the first TV line selection capability in its class
5-digit frequency counter
Single-sweep function


此為佳位科技舊網站 按這裡前往佳位科技新網站!!